05.12.2023

The Rolls-Royce Phantom II was the third and last of Rolls-Royce’s 40/50 hp models, replacing the New Phantom in 1929. It used an improved version of the New Phantom engine in an all-new chassis. A “Continental” version, with a short wheelbase and stiffer springs, was offered. The Phantom II used a refinement of the New Phantom’s 7.7 L (7,668 cc or 467.9 cu in) pushrod – OHV straight-6 engine with a new crossflow cylinder head.

The engine was bolted directly to the 4-speed manual transmission. Synchromesh was added on gears 3 and 4 in 1932 and on gear in 1935. Power was transmitted to the rear wheels using an open driveshaft, a hypoid bevel final drive, and Hotchkiss drive, replacing the torque tube from a remotely mounted gearbox used on earlier 40/50 hp models.

The chassis of the Phantom II was completely new. The front axle was mounted on semi-elliptical leaf springs as on earlier 40/50 hp models, but the rear axle was now also mounted on semi-elliptical springs instead of cantilever springs. This, along with the drivetrain changes, allowed the frame to be lower than before, improving the handling.

The 4-wheel servo-assisted brakes from the Phantom I were continued, and the Bijur centralized lubrication system from the Springfield-built Phantom I was included on all Phantom II chassis. The standard wheelbase of the Phantom II was 150 inches (3,800 mm). A 144 inches (3,700 mm) short-wheelbase chassis was also available. A total of 1,681 Phantom II chassis of all types were built.

The Rolls-Royce Phantom II was the third and last of Rolls-Royce’s 40/50 hp models, replacing the New Phantom in 1929. It used an improved version of the New Phantom engine in an all-new chassis. A „Continental” version, with a short wheelbase and stiffer springs, was offered.

The Phantom II was featured in the films The Sorcerer’s Apprentice and Indiana Jones and the Last Crusade. When its specifications are quoted during the scene in the Kingdom of Hatay, the Sultan states that the Rolls-Royce Phantom II has a „4.3 litre, 30 horsepower, six-cylinder engine, with Stromberg downdraft carburetor” and „can go from zero to 100 kilometers an hour in 12.5 seconds (and I even like the color).” However, the car used in the film was actually a Rolls-Royce Barker Saloon, with 20/25 hp. It is also the star of the 1964 film The Yellow Rolls-Royce where its engine specifications are given as the engine having a bore of 4.5″ and stroke of 5.5″, which would equate to 525 cubic inches.